How to apply your grip

How to apply the Cork grip in 5 simple steps

  • Step 1: Remove the old grip from your hockey stick and trim the edge ✂️
  • Step 2: Peel off the adhesive backing from the Cork grip.
  • Step 3: Start at the top.
  • Step 4: Wrap the Cork grip downwards at a slight angle. Apply some tension as you wrap, making sure each layer overlaps by about 2-3 millimeters.
  • Step 5: Secure with end tape.
  • No hassle, just the perfect re-grip for your hockey stick.

The easiest hockey grip application in 2 simple steps

  • Step 1: Slide the Sleeve over your hockey stick shaft.
  • Step 2: Pour boiling water over the Sleeve, or use a heat gun to warm it evenly. Watch it shrink and fit your stick perfectly for a tight, seamless fit.
  • ⚠️ Note: Always be careful with boiling water! Pour slowly and avoid contact with your hands or skin.